BG TECH.
VERSION III
2001/2/28
TXTONE : TX CTCSS Frequency Setting
When you select a frequency or no frequency (CTCSS off) pressing up/down arrow
Key or rotate a rotary switch, press to save and exit
Default is “88.5”.
dTMF : DTMF dial Setting
à
Initial Data Entry
1. Press
KEY to select DTMF mode.
2. Press
or rotary switch to select the address from d1 to d6.
3. Main frequency display shows ------. On the sub-frequency display, dTMF will be
displayed and memory display shows d1 to d6.
4. Enter the code by pressing 16 keys. If you try to enter mode than 16 digits, the radio
sounds two short beeps to indicate the error.
5. To enter the code to another address, press or rotate the rotary switch.
The data in the previous address is stored automatically.
6. Do the same way of 4.
7. To reconfirm DTMF code, hold down “F” and rotate the rotary switch or F +
8. After entering DTMF code, press or PTT key to go to VFO mode.
à
Data re -entry
1. Select the address to modify.
2. Enter the desired data.
WX-Area Code Setting mode.
à
Initial Data Entry
1. Press
KEY to select Area setting mode.
2. Press
or rotary switch to select the address from A to A9.
3. Main frequency display shows ------. On the sub-frequency display, AREAF will be
displayed and memory display shows A1 to A9.
4. Enter the code by pressing 16 keys. If you try to enter mode than 6 digits, the radio
sounds two short beeps to indicate the error.
5. To enter the code to another address, press or rotate the rotary switch.
The data in the previous address is stored automatically.
