Radio Shack FRS Owner'S Manual Download Page 5

5

charge 550mAH Ni-MH batteries in your ra-
dio. For best battery life, do not overcharge.

Warning: Do not charge non-rechargeable
batteries in the radio. Non-rechargeable bat-
teries can get hot and explode if you try to re-
charge them.

Cautions:

You must use a Class 2 power
source that supplies 9V DC
and delivers 300 mA. Its center

tip must be set to positive and its plug
must fit the radio's 

CHG 

jack. Using an

adapter that does not meet these specifi-
cations could damage the radio or the
adapter.

• Always connect the adapter to the radio

before you connect it to an external pow-
er source (such as an AC outlet or a ve-
hicle cigarette-lighter socket). When you
finish, disconnect the adapter from the
external power source before you dis-
connect it from the radio.

• Do not charge rechargeable batteries

longer than 12 to 16 hours.

Note: Ni-CD batteries and other batteries of
lower capacity will fully charge faster, but pro-
vide less operating time

1. Rotate 

OFF

 toward 

OFF

 until it

clicks to turn off the radio, then pull down
the latch on the bottom of the radio to re-
move the battery compartment cover. 

2. Use a pointed object such as a pen to

set 

AL/NI

 to 

NI

!

21-1822.fm  Page 5  Friday, March 10, 2000  10:39 AM

Summary of Contents for FRS

















Reviews: