8
Mounting the Base
Directly on the Wall
For this mounting method, you need
two wood screws (not supplied) with
heads that fit into the keyhole slots on
the bottom of the base.
1. Drill two holes 3
15
/
16
inches apart. Then
thread a screw into
each hole, letting
the heads extend
about
5
/
16
inch from
the wall.
2. Plug one end of the supplied short
modular cord into the
LINE
jack on
the back of the base.
3. Insert the supplied power
adapter’s barrel plug into the
DC
12V
jack on the back of the base.
5
/
16
3
15
/
16
T
P DC 12V LINE
T
P DC 12V LINE
4. Route the adapter’s cord through
the strain relief slot on top of the
base.
5. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
6. Plug the adapter into a standard
AC outlet.
Strain Relief Slot
RINGER
OFF
ON
LINE
43-1051.fm Page 8 Tuesday, August 17, 1999 1:08 PM
