background image

2

FEATURES

© 1995 Tandy Corporation.

All Rights Reserved.

COM-LOK and Radio Shack are registered trademarks used by Tandy Corporation.

Your ET-547 25-Channel Cordless
Telephone with 3 Priority and 10
Speed Dial Memories is designed to
exacting standards that ensure reliabil-
ity, long life, and outstanding perfor-
mance.

Its features include:

25 Channels — so you can switch to
the one that provides the least interfer-
ence

Super CCT Noise-Reduction Cir-
cuitry
 — provides clear telephone
conversations, giving you sound clarity
comparable to that of a corded phone.

Security Access-Protection Code —
automatically sets the first time you
use your phone to prevent other cord-
less phone users from using your
phone line while the handset is off the
cradle.

COM-LOK

®

 — ensures that other

cordless phone users cannot use your
phone line when the handset is on the
cradle.

Page — lets you send a paging signal
from the base to the handset to page
someone or locate the handset if you
misplace it.

13-Memory Automatic Dialing — lets
you store frequently called numbers
then dial them with the touch of a but-
ton (from three priority dialing memo-
ries), or by entering one of 10 speed-
dial memory location numbers.

Redial — lets you quickly redial the
last number dialed by touching a single
button.

Flash — sends an electronic switch-
hook signal for use with special phone
services, such as call waiting.

Volume Control — lets you adjust the
volume of the handset’s ringer/paging
tone and your telephone conversa-
tions.

Tone/Pulse Dialing — lets you use
your phone with tone or pulse service.

Hearing-Aid Compatibility — lets
you use your phone with hearing aids
that have a T (telephone) switch.

This telephone has been tested and
found to comply with all applicable UL
and FCC standards.

43-1047.fm  Page 2  Tuesday, August 17, 1999  11:37 AM

Summary of Contents for ET-547

























Reviews: