10
If the dial tone stops, you have
touch-tone service. Leave
DIAL
MODE P- -T
set to
-T
. If the dial tone
continues, you have pulse service.
Set
DIAL MODE P- -T
to
P-
.
4. Press
SPEAKER
to hang up.
TURNING THE BASE
RINGER ON/OFF
To turn off the base's ringer
, set
RINGER
on the back of the base to
OFF
. You can
still make or receive calls using this
phone. Telephones on the same line
(and the phone's handset if it is away
from the base) still ring when there is an
incoming call.
To turn on the base's ringer
, set
RINGER
to
ON
.
SETTING THE HANDSET’S
RINGER TONE/VOLUME
You can select one of four different ring-
er tone/volume settings while the phone
is not in use. Press
8
8
8
8
or
9
9
9
9
on the
handset to increase or decrease to the
ringer level setting. Repeatedly press
8
8
8
8
or
9
9
9
9
until you hear the desired ring-
er setting. Each time you press
8
8
8
8
or
9
9
9
9
, the ringer changes and the display
shows
Ringer
A
High
,
Ringer
A
Low
,
Ringer
B
High
, or
Ringer
B
Low
.
Note: Pressing
8
8
8
8
when the display
shows
Ringer
A
High
or
9
9
9
9
when the
display shows
Ringer
B
Low
does not
change the setting. Press the other but-
ton to change the setting.
SETTING AUTO TALK
Your phone is preset so you must press
TALK
to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and hold down
CALL ID
until the Caller ID setup
menu appears with
Auto
Talk
selected.
2. Press
SELECT
to change the auto
talk setting.
On
or
Off
appears indi-
cating the selected setting.
3. Press
CALL ID
or return the handset
to the base to store the new setting.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you have Call Waiting with Caller ID
service, you can set the phone to show
Caller ID information for an incoming call
even while you are already on the
phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
43-1123.fm Page 10 Tuesday, September 5, 2000 11:13 AM
