Radio Shack ET-1105 Owner'S Manual Download Page 27

27

THE FCC WANTS YOU TO 
KNOW

In the unlikely event that your phone
causes problems on the phone line, the
phone company can temporarily discon-
tinue your service. If this happens, the
phone company attempts to notify you in
advance. If advance notice is not practi-
cal, the phone company notifies you as
soon as possible and advises you of your
right to file a complaint with the FCC.

Also, the phone company can make
changes to its lines, equipment, opera-
tions, or procedures that could affect the
operation of this telephone. The tele-
phone company notifies you of these
changes in advance, so you can take the
necessary steps to prevent interruption
of your telephone service.

Your phone might cause TV or radio in-
terference even when it is operating
properly. To determine whether your
phone is causing the interference, turn
off your phone. If the interference goes
away, your phone is causing the interfer-
ence. Try to eliminate the interference
by:

• Moving your phone away from the

receiver

• Connecting your phone to an AC

outlet that is on a different electrical
circuit from the receiver

• Contacting your local RadioShack

store for help

If you cannot eliminate the interference,
the FCC requires that you stop using
your phone.

Some cordless telephones operate on
frequencies that may cause interference
to nearby TVs and VCRs. To minimize or
prevent such interference, the base of
the cordless telephone should not be
placed near or on top of a TV or VCR.

LIGHTNING

Your telephone has built-in lightning pro-
tection to reduce the risk of damage from
surges in telephone line and power line
current. This lightning protection meets
or exceeds FCC requirements. However,
lightning striking the telephone or power
lines can damage your telephone.

Lightning damage is not common. Nev-
ertheless, if you live an area that has se-
vere electrical storms, we suggest that
you unplug your phone during storms to
reduce the possibility of damage.

43-1105.fm  Page 27  Monday, August 30, 1999  1:57 PM

Summary of Contents for ET-1105





























Reviews: