18
Special Features
3. Press
M
.
M
and the memory loca-
tion number flash.
4. Use the number keys to enter the
new memory location number.
The receiver beeps.
Special Features
Setting the Alarm Time
The receiver’s timer alarm lets you
set two alarm times, so you can
awaken to either the radio or a buzz-
er.
Setting the Radio Alarm
To set the radio alarm time, follow
these steps.
1. Tune to the desired radio station.
2. If the receiver is on, press
DIS-
PLAY
to display the time. If the
receiver is off, it automatically
displays the time.
3. Press
.
AM 12:00
appears
and
flashes for about 7 sec-
onds.
You can set the clock to use a
12- or 24-hour format (see
“Using Mode” on Page 20).
4. While
is flashing, use the
number keys to enter the desired
alarm time then press
M
to set
AM or PM.
If you enter an incorrect digit,
press
C
(cancel) once to erase
the last digit, twice to erase the
last two digits, and so on, then
enter the correct digit.
5. Press
. The set time
appears and
stops flashing,
indicating the radio alarm has
been set. About 2 seconds later,
the receiver returns to the current
time.
6. To check the alarm time, press
. The alarm time appears for
about 5 seconds, then disap-
pears. If you press
again,
the display returns to the current
time.
7. To cancel the alarm time, press
POWER
/
or
DISPLAY
to dis-
play the current time then press
. While
flashes, press
C
.
disappears.
Setting the Humane Wake
System (HWS) Alarm
The receiver features a Humane
Waking System (HWS), so you are
not startled awake.
20-230.fm Page 18 Friday, March 24, 2000 9:07 AM
