9
OPERATION
To use the power supply after you connect the device to it, set
POW-
ER
to
l
to turn it on.
Caution: If the power supply’s
POWER
switch does not light:
• Check all connections and confirm the wall outlet has power.
• If the outlet has power, check to see if the circuit breaker on the
back of the power supply has tripped.
If your device stops operating, check the circuit breaker. If it has
tripped, check and correct for a short or overload condition, wait for
the device to cool, then press in the reset button on the back of the
power supply.
Your power supply’s temperature protection circuit automatically
shuts down the power supply when it is overheated. If this happens,
turn off the power supply, then wait until the power supply cools be-
fore you turn on power again.
(il-
22-504.fm Page 9 Friday, August 6, 1999 12:52 PM
