background image

4

and/or cause interference on your room monitor. This can
occur on any device that uses standard radio frequencies.

• Turn the transmitter off when not in use since it continues

to transmit as long as power is on.

Caution: The room monitor is designed to assist adults in child
supervision. It does not replace watchful and responsible care
of a child. To hear its transmissions, you must stay within the
room monitor’s range when you are using it, and you should
regularly monitor its transmissions to ensure it receives proper-
ly. 

THE FCC WANTS YOU TO KNOW

Your room monitor might cause TV or radio interference even
when it is operating properly. To determine whether your room
monitor is causing the interference, turn off your room monitor.
If the interference goes away, your room monitor is causing it.
Try to eliminate the interference by:

• Moving your room monitor away from the device that is

receiving interference

• Connecting your room monitor’s transmitter to an outlet

that is on a different electrical circuit from the device that is
receiving interference

• Contacting your local RadioShack store for help

If you cannot eliminate the interference, the FCC requires that
you stop using your room monitor.

43-489rc.fm  Page 4  Tuesday, October 3, 2000  10:12 AM

Summary of Contents for Cordless Room Monitor

















Reviews: