5
VIP CALL LIST
The CID lets you save up to 55 call records in its VIP call list. Then,
when you receive a call from a number matching one stored in a VIP
call record, the CID sounds 2 quick beeps each time the phone rings
until you answer the call.
The CID protects VIP call records so you cannot delete them by mis-
take. To delete a VIP call record, you must first unmark it using the
steps in “Unmarking a VIP Call Record” on Page 5, then delete it us-
ing the steps in “Deleting a Single Call” on Page 4.
Marking a VIP Call Record
1. Repeatedly press either
REVIEW
key until you see the call
record you want to mark as a VIP call.
2. Hold down
CALLBACK
until
appears. The CID beeps
once and marks the call record as a VIP record.
Note: If the CID's VIP memory is full (55 VIP call records are
already stored), the CID beeps three times when you hold down
CALLBACK
. To store another VIP call record, you must first
delete an existing one.
As you press either
REVIEW
key to review all stored records,
appears on each record marked as a VIP call record.
To review VIP call records only, repeatedly press either
REVIEW
key.
The call records appear in the order you entered them.
Unmarking a VIP Call Record
1. Repeatedly press either
REVIEW
key until you see the VIP call
record you want to unmark.
2. Hold down
CALLBACK
until
disappears. The CID
beeps and unmarks the call record.
ˆ
Troubleshooting
If your CID stops operating properly, these suggestions might help.
If the CID still does not operate properly, try resetting it (see "Reset-
ting the CID") or take it to your local RadioShack store for assis-
tance.
ˆ
Care
To enjoy your CID for a long time:
• Keep the CID dry. If it gets wet, wipe it dry immediately.
• Use and store the CID only in normal temperature environ-
ments.
• Handle the CID gently and carefully. Don’t drop it.
• Keep the CID away from dust and dirt.
• Wipe the CID with a damp cloth occasionally to keep it looking
new.
Modifying or tampering with the CID’s internal components can
cause a malfunction and invalidate its warranty. If your CID is not
performing as it should, take it to your local RadioShack store for as-
sistance. If the trouble is affecting the telephone lines, the phone
company can ask you to disconnect your CID until you have re-
solved the problem.
LIGHTNING
Your CID has built-in protection circuits to reduce the risk of damage
from surges in telephone and power line current. These protection
circuits meet or exceed FCC requirements. However, lightning strik-
ing the phone line can damage your CID.
Lightning damage is not common. Nevertheless, if you live in an
area that has severe electrical storms, we suggest you unplug your
CID during storms to reduce the possibility of damage.
Problem
Solution
Blank screen
The Caller ID is not receiving power.
Make sure the the AC adapter is
plugged in.
Adjust the contrast as described in
“Adjusting the Display Contrast” on
Page 3.
You receive a call, but do
not receive any Caller ID
information.
You answered the call before the
Caller ID received the call informa-
tion. Wait until your phone rings at
least once before answering a call.
Problem
Solution
