background image

 
Chronomatic-300 AM/FM Clock Radio with Telephone 
(120-1602)                 Features                   Faxback Doc. # 18690 
 
Your Chronomatic-300 AM/FM Clock Radio with Telephone combines a full- 
featured AM/FM alarm clock radio with a high-quality telephone.  It is the 
perfect bedroom combination and an attractive space-saving addition to your 
home. 
 
The clock radio includes the following features: 
 
           Alarm - wakes you with a buzzer or the radio. 
 
    Snooze Timer - silences the alarm and sets it to sound again in about 9 
                   minutes. 
 
     Sleep Timer - plays the radio for up to 1 hour and 59 minutes and then 
                   automatically turns it off so you can fall asleep as you 
                   listen. 
 
  Battery Backup - keeps the clock running for up to 8 hours in case of AC 
                   power failure. 
 
Battery Sentinel - lets you know when it is time to replace the backup 
                   battery. 
 
   Large Display - makes is easy to read the clock and other indicators. 
 
          Dimmer - lets you adjust the display to suit the room's lighting. 
 
  Headphone Jack - lets you listen privately. 
 
      Radio Mute - automatically turns down the radio's volume during a 
                   phone conversation. 
 
The telephone has these features: 
 
                   Redial - lets you quickly redial the last number dialed. 
 
      Ringer High/Low/Off - lets you turn off the ringer or set its volume 
                            to high or low. 
 
             Flash Button - provides easy, reliable use of special 
                            telephone company services. 
 
       Pulse/Tone Service - lets you use your phone with pulse or tone 

Summary of Contents for Chronomatic-300

















Reviews: