9
Operation
Note: You can mount your CD player
in your car using an optional mount-
ing bracket. Your local RadioShack
store has a complete line of mounting
brackets and hardware.
ˆ
Operation
LOADING A CD
Caution: To help prevent dust from
entering the CD player, always keep
the CD compartment cover closed,
except when loading or unloading
CDs.
Remove the protective sheet inside
the CD compartment before operating
the CD player.
1. Press
OPEN
to open the CD
compartment door.
2. Carefully place a CD, label side
up, over the center hub inside the
CD compartment. Then gently
press the CD down over the cen-
ter hub.
3. Close the compartment cover.
The CD begins to play after
--
and
the total track number and play time
appear briefly, if power is on. If power
is not on, press
.
Note: To remove a CD, lift up the CD
while pressing down on the center
hub.
PLAYING A CD
Warning: To protect your hearing if
you are using earphones or head-
phones, set
VOLUME
to its lowest set-
ting before you play a CD.
Press
. The CD play-
er automatically turns
on,
10
SEC
and the anti-
shock icon appears, then
--
flashes. The total
number of tracks and total play time
appear briefly. Then track 1 begins to
play.
If you connected earphones, head-
phones, or amplified speakers to the
CD player’s
PHONES
jack, use
VOL-
UME
on the CD player to adjust the
volume.
If you connected the CD player to
your home audio system or vehicle’s
sound system using the
LINE OUT
jack, you must use the home audio or
auto sound system’s volume control
to adjust the volume.
To temporarily stop play, press
.
The elapsed time flashes. To resume
play, press
again.
42-6004.fm Page 9 Friday, July 21, 2000 1:18 PM
