background image

3

AC Power

You can power the TV using the supplied 
AC adapter.

Caution:

You must use a regulated ITE 
power source that supplies 
12V DC and delivers at least 

800 mA. Its center tip must be set to 
positive and its plug must fit the TV's 

DC 12V

 jack. The supplied AC adapter 

meets these specifications. Using an 
adapter that does not meet these 
specifications could damage the TV or 
the adapter.

Insert the AC adapter’s barrel plug into the 
TV’s 

DC 12V

 jack. Then plug the other end 

of the AC adapter into a standard AC outlet.

Cautions:

• Do not leave the adapter plugged into 

the AC outlet or connected to the TV 
when you are not using the TV.

• The adapter might become warm after 

extended periods of use.

Vehicle Battery Power

You can power the TV from a vehicle’s 12V 
power source (such as a cigarette-lighter 
socket) using the supplied DC adapter.

Caution:

You must use a power source 
that supplies 12V DC and 
delivers at least 800 mA. Its 

center tip must be set to positive and its 
plug must fit the TV's 

DC 12V

 jack. The 

supplied DC adapter meets these 
specifications. Using an adapter that 
does not meet these specifications could 
damage the TV or the adapter.

Plug the DC adapter’s barrel plug into the 
TV’s 

DC 12V

 jack. Unplug the vehicle’s 

cigarette lighter and plug the large end of the 
DC adapter into the cigarette-lighter socket.

Caution: Do not leave the adapter plugged 
into the cigarette-lighter socket or connected 
to the TV when you are not using the TV.

Note: If the TV does not operate properly 
when you use DC power, be sure the 
cigarette-lighter socket is clean and that the 
adapter’s plug is properly connected to the 
socket.

Using the Stand

You can attach the supplied stand to the 
bottom of the TV. This lets you tilt the TV to 
the desired viewing angle and to obtain the 
desired picture brightness.

You can also use the stand to permanently 
mount the TV on a flat surface such as a 
desk, shelf, or table. To mount the TV on a 
flat surface, drive two screws (not supplied) 
into the mounting holes at each end of the 
stand to lock the stand in place, then attach 
the TV to it.

!

!

16-3013 cyn.fm  Page 3  Tuesday, November 23, 2004  1:41 PM

Summary of Contents for Anevision Color TFT LCD TV









Reviews: