3
5. Enter that selected channel number for
storing the best reception antenna angle.
Press
MEMORY
on the antenna base or
the assigned MEMORY key on the
remote control. The stored channel
number appears.
±
4'%#..+0)6*'
5614''00#
#0).'
1. Press the power key on the remote
control to turn on the antenna.
2. Enter the desired UHF/VHF channel
number. The antenna automatically turns
to the stored angle for that channel.
3. To adjust the FM receiver’s antenna
angle, press the assigned L-TUNING (
I
)
and R-TUNING (
J
) keys on the remote
control, or
L-TUNING
(
I
) and
R-TUNING
(
J
) on the antenna base, until
the receiver gets the best reception.
&'.'6+0)5614'&
#06'00##0).'5
&
'.'6+0)
#0
+
0&+8+&7#.
#
06'00#
#
0).'
1. Be sure the antenna’s power is turned
on.
2. Press the assigned CLEAR key on the
remote control, or
CLEAR
on the antenna
base.
flashes.
3. Enter the desired channel number then
press the assigned CLEAR key on the
remote control, or
CLEAR
on the antenna
base.
appears.
4. Enter the desired channel number using
the remote control to tune to another
channel position.
±
&
'.'6+0)
#
..
#
06'00#
#
0).'5
1. Unplug the AC adapter from the jack on
the back of the antenna base.
2. Wait for 10 seconds, then synchronously
hold down
L-TUNING
(
I
) and
R-TUNING
(
J
) on the antenna base and reconnect
the adapter to the jack on the back of the
antenna base.
b
appears. All stored
information is deleted.
±
75+0) )#+0
%10641.
If “snow” appears in the TV screen or the
picture appears to be “rolling”, rotate
+/– GAIN
on the back of the antenna base until the
picture improves.
5'66+0)#
5'%105174%'
To use a second video source, such as cable
TV, a satellite dish, or a video game system,
press the power key on the remote control to
turn off the power. The antenna automatically
switches to the external input.
6417$.'5*116+0)
We do not expect you to have any problems
with your antenna, but if you do, these
suggestions might help.
%#4'
Keep the antenna dry; if it gets wet, wipe it
dry immediately. Use and store the antenna
only in normal temperature environments.
Handle the antenna carefully; do not drop it.
Keep the antenna away from dust and dirt,
and wipe it with a damp cloth occasionally to
keep it looking new.
If your antenna is not performing as it should,
take it to your local RadioShack store for
assistance. Modifying or tampering with the
antenna’s internal components can cause a
malfunction and might invalidate its warranty.
68$CPFU
%JCPPGNU
VHF-LO
2-6
VHF-HI
7-13
UHF
14-69
±
016'
±
•
To make room for more channels, delete
some antenna angles (See “Deleting Stored
Antenna Angles” on Page 3).
•
The antenna can store 50 antenna angles for
up to 99 channels, but its receiving range is
limited to channels 1-69 according to TV
broadcasting.
•
After all stored antenna angles are deleted,
(U
flashes twice and
appears when you
turn on the antenna power.
•
If you enter an invalid channel,
(U
flashes
twice then that channel number appears.
While the display is still flashing the invalid
channel number, enter the correct number
then press clear. Enter the correct channel
number.
2TQDNGO
5WIIGUVKQP
The antenna does
not work or works
poorly.
Turn off the antenna
power then turn it on
again.
Be sure the AC adapter
is properly and securely
connected.
Be sure the antenna
power is turned on. If the
power is turned on but
the antenna still does not
work, return it to the
store.
While learning
commands from a TV
or universal remote
control, the antenna
does not respond.
Be sure the learning
process is correct.
Try the remote control’s
other keys.
Try another remote
control.
6*'(%%9#065;17
61-019
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult your local RadioShack store or
an experienced radio/TV technician for
help.
• If you cannot eliminate the interference,
the FCC requires that you stop using
your antenna.
Changes or modifications not expressly
approved by RadioShack may cause
interference and void the user’s authority to
operate the equipment.
