20
Operation
Note: If the main unit does not receive or
stops receiving a signal from the remote
sensor,
---
appears. If this happens,
force a signal search (see “Forcing A Sig-
nal Search” on Page 30) or reset the
main unit (see “Resetting the System” on
Page 31).
REMOTE SENSOR
SCANNING
You can set the main unit to automatical-
ly scan and display readings from the re-
mote sensors. The readings from each
channel appear for about 4 seconds.
To scan the remote sensors, hold down
CHANNEL
for about 2 seconds. To stop
scanning, press any button.
