20
Operation
3. Press
SLEEP
again within 10 seconds to add
another 15 minutes to the sleep time. Repeat as
desired up to a maximum of 60 minutes.
4. To deactivate the Sleep Timer, press any key. The
red light stops blinking.
Locking/Unlocking the Sleep Timer
The 5-in-One Remote’s built-in sleep function can be en-
abled even if another device has a sleep device. Simply
lock the Sleep Timer to ensure it functions.
1. Select a device for the sleep timer (
TV
or
CBL/SAT
).
2. Hold down
P
until the red light blinks twice.
3. Press
9 7 0
.
4. The red light blinks twice when the Sleep Timer is
locked. (If you are unlocking the Sleep Timer, the
red light blinks four times.)
USING MANUAL CODE SEARCH
If your home entertainment device does not respond to
remote control commands after trying all of the codes
listed for your brand, or if your brand is not listed, try
searching for your code.
Follow these steps to search for codes manually.
1. Turn on the desired device.
2. On the 5-In-One Remote, press the appropriate
device key once.
3. Hold down
P
until the red light blinks twice.
4. Press
9 9 1
. The red light blinks twice.
5. Aim the 5-In-One Remote at the desired device and
slowly alternate between pressing
POWER
and the
appropriate device key. Stop when the device turns
off — a code that works has been found.
Note: In the search mode, the remote sends IR
codes from its extensive library to the selected
