12
CONNECTING TO A SINGLE
PHONE LINE
The system connects to the phone line and your phone using
two modular phone-line connectors. If your phone does not
have this type of connector, you can get the necessary adapt-
ers at your local Radio Shack store. Or you can have the
phone company update your phone wiring.
Note: The phone company can charge you to update phone
wiring. The USOC number of the jack to be installed is RJ11C
(for a single-line phone) or RJ14C (for a two-line phone).
Follow these steps to connect the system to the phone line.
1. Unplug the existing telephone’s modular cord from the
modular phone jack and plug this cord into the system’s
PHONE
jack.
2. Plug the supplied modular cord into the system’s
TEL.
LINE
jack.
3. Plug the other end of the cord into the modular phone
jack.
43-959.fm Page 12 Monday, August 16, 1999 3:26 PM
