25
bracket as a template, mark the mounting
screw locations on the wall.
2. Drill two holes about
1
/
8
inch in diameter in
the wall at the marked locations.
3. While holding the bracket against the wall,
thread a screw through each round hole in
the bracket, then tighten the screws.
4. Align the slots on the back of the CID with
the hooks on the bracket. Gently push the
CID down on the bracket to secure it.
Note: To remove the CID from the bracket, press
up on the bottom of the CID until the bracket
snaps off.
43-938.fm Page 25 Thursday, July 8, 1999 6:51 AM
