background image

12

REVIEWING CALLER ID 
RECORDS

Each time you receive a call, your CID-
927 stores a Caller ID record that you
can review later. A Caller ID record in-
cludes:

• call number (in the order the call is

received)

• time and date of the call

• caller’s telephone number

• caller’s name (if available)

Repeatedly press 

REVIEW

 

 or 

 to

see Caller ID records.

END OF LIST

 appears after the first

or last record as you scroll through the
list.

Notes:

• The display shows up to 10 digits of

a phone number. If an incoming
phone number is longer, the display
shows only the last 10 digits.

• The CID-927 returns to the time/

date display after about 20 seconds
if you do not press a key.

DELETING CALLER ID 
RECORDS

The CID-927 lets you delete individual
Caller ID records or all reviewed Caller
ID records. It will not delete Caller ID
records that have not been reviewed.

Note: You cannot delete Caller ID
records during a call.

To delete a single Caller ID record, re-
peatedly press 

REVIEW

 

 or 

 to select

a record, then press 

DELETE

 twice. If

there are no other records, 

NO

 

CALLS

appears.

To delete all Caller ID records, wait until
the CID-927 shows the clock display,
then hold down 

DELETE

 for about four

seconds. 

ERASE ALL

 flashes, then the

phone beeps once to confirm all records
were deleted.

REVIEW

DELETE

43-927.fm  Page 12  Thursday, June 24, 1999  9:36 AM

Summary of Contents for 43-927

















Reviews: