INSTALLING THE PHONE
Desk Mounting
Note: The USOC number of the jack to be installed is
RJ11C.
Modular Telephone Jack
•
This symbol is intended to alert you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to inform you
that important operating and servicing
instructions are included in the papers
with the telephone.
RISK OF ELECTRIC SHOCK
.
CAUTION
DO NOT OPEN
.
1998 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
Adjust
HANDSET VOL
LO/MED/HI
to the level
you want to hear
through the handset.
To turn on the talking fea-
ture, with the phone off
hook, press
TALKING
so
the phone chimes once.
When you press
FLASH
,
REDIAL
, or any number
key, the phone announces
the button or number. The
phone chimes when you
press /
TONE
, or
#
.
To turn off the talking fea-
ture, with the phone off
hook, press
TALKING
again so the phone chimes
twice.
Set
RINGER ON/OFF
to
ON
to turn
on the ringer. Set to
OFF
to turn off
the ringer. You can make calls with
the ringer off, and you can receive
calls if you hear another phone on
the same line ringing.
Switch to
TONE
or
PULSE
to
match the type of service you
have.
Set
RINGER FREQUENCY
HIGH/LOW
to the comfort-
able level.
Press
REDIAL
to dial
the last number dialed
(up to 16 tone or pulse
digits).
Press
FLASH
in place of the
switchhook for special ser-
vices such as call waiting.
Press to reset the phone.
Use a straightened paper
to press
RESET
when the
telephone stops working
properly, or each time you
replace the batteries.
Lights when the phone’s bat-
tery is low.
Note: The phone detects if
the battery is low when the
line cord is connected to the
phone jack.
Press to disconnect a call.
Plug the handset cord
into the jacks on the
handset and base.
Press
/TONE
during a call to use special
touch-tone services. Dial the main number
using pulse dialing, and then press
/TONE
during the call to switch to tone dialing
USING THE PHONE
