Radio Shack 43-3578 User Manual Download

Page: 1 / 44

2004 RadioShack Corporation.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

OWNER’S MANUAL
Please read before using this equipment.

900MHz Cordless Telephone

with Caller ID/Call Waiting

43-3578

30-Record CID Capacity

— stores

up to 30 call records in Caller ID.

Ample Talk and Standby Time

— the supplied

battery (when fully charged) provides about 7
hours of talk time or 14 days of standby time.

Headset Jack

— lets you connect an optional

headset for hands-free convenience.

Auto Talk

— lets you set the phone to answer

a call by simply lifting the handset from the
base.

10-Number Memory Dialing

— lets you store

up to 10 numbers in memory for easy dialing.

IMPORTANT

If an icon appears at the end of a paragraph, go to the box on that page
with the corresponding icon for pertinent information.

— Warning

— Important

— Caution

— Hint

— Note

43-3578.book Page 1 Thursday, February 12, 2004 3:12 PM

Summary of Contents for 43-3578













































Search results

Summary of Contents for 43-3578

Reviews:

Related manuals for 43-3578

Brands by name

Popular brands

Radio Shack 43-3578, Owner'S Manual

Search results

Summary of Contents for 43-3578

Reviews:

Related manuals for 43-3578

Brands by name

Popular brands