Radio Shack 43-3537 User Manual Download

Page: 9 / 10

'8+'9+0)

#..'4

'%14&5

If the handset is face-up on the base, the
number of new and total Caller ID records
appear, and you can view any new records.

To review the Caller ID records, lift the
handset and press

CID/MENU

. The number of

new Caller ID records, if any, and the total
number of records appears. Repeatedly
press

to scroll through the Caller ID

records from the newest to the oldest, or

to scroll back through the records. To scroll
quickly through the records, hold down

The top line of each record shows the date,
time and the number of calls from that
number. The second line shows the caller’s
name (if available), and the third line shows
the caller’s phone number.

#..'4

'55#)'5

&&+0)

'.'6+0)

6*'

4'#

1&'

The display shows the area code of an
incoming call, unless the call comes from the
area code you stored (see “Storing Your Area
Code” on Page 5). You can add the area
code to the display or delete it. With the
record displayed, press

to add or delete the

area code.

Numbers are stored in memory as they
appear on the display, with or without the
area code. Numbers in Caller ID records
remain the same, even if you add or delete
the area code.

+#.+0)

7/$'45

(41/

#..'4

'%14&

To dial a local number stored in a Caller ID
record, recall the record, then press

TALK

To add or delete the area code, press

before you press

TALK

If the call is long distance, press

(

''''

appears

before the displayed number) before you
press

TALK

614+0)

#..'4

'%14&

'/14;

1. Press

CID/MENU

then

to recall the

record you want to store. To add or
delete the area code, press

. If it is a

long distance number, press

2. Press

MEM

I[b[Yj

BeYWj_ed

appears.

3. Choose a memory location (

–

) by

pressing a number or by repeatedly
pressing

, then press

SEL

If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.

If a record exists in the selected location,

H[fbWY[

C[ceho5

appears, prompting you

to confirm the replacement. Press

to move the cursor to

O[i

, then

press

SEL

'.'6+0)

#..'4

'%14&5

You can delete Caller ID records individually
or all at once.

'.'6+0)

+0).'

#..'4

'%14&

1. Press

CID/MENU

then

to recall the

record you want to delete.

2. Press

DEL/CH

:[b[j[

C[iiW][5

appears,

prompting you to confirm the deletion.

3. Press

to move the cursor to

O[i

, then

press

SEL

DEL/CH

. The phone beeps

once, indicating that the record was
deleted.

'.'6+0)

#..'4

'%14&5

1. Press

CID/MENU

so the record totals

appear.

2. Press

DEL/CH

:[b[j[

7bb5

appears,

prompting you to confirm the deletion.

3. Press

to move the cursor to

O[i

, then

press

SEL

DEL/CH

. The phone beeps

once and

JEJ7B0&&

appears, indicating

that all Caller ID records were deleted.

&KURNC[

&GUETKRVKQP

D[m0ýNN

JejWb0ýNN

Shows the number of new
Caller ID records (records you
have not reviewed) and the
total number of records.

Fh_lWj[

DWc[ý

Fh_lWj[

DkcX[h

The caller has blocked the
caller ID information.

Kdademd

DWc[ý

Kdademd

DkcX[h

The caller is not within a
Caller ID service area.

?dYecfb[j[

:WjW

Appears if there was an error
during the transmission of CID
information. Occasional errors
are normal. If the phone
frequently displays

?dYecfb[j[ý

:WjW

, contact your local

telephone company or your
local RadioShack store.

016'

If a Caller ID record does not contain a phone
number (if it was blocked by the caller, for
example), you cannot dial from that record.

Summary of Contents for 43-3537











Search results

Summary of Contents for 43-3537

Reviews:

Related manuals for 43-3537

Brands by name

Popular brands

Radio Shack 43-3537, Owner'S Manual

Search results

Summary of Contents for 43-3537

Reviews:

Related manuals for 43-3537

Brands by name

Popular brands