background image

In

s

ta

lla
ti

o

n

6

1. Press down and slide off the battery compartment 

cover in the direction of the arrow to remove it.

2. Lift the battery pack out of the compartment. 

3. Plug the battery pack’s connector into the socket in the 

compartment (the connector fits only one way), then 
place the battery pack in the compartment.

4. Replace the cover.

To charge the battery pack, place the handset on the base. 
The CHARGE/IN USE indicator on the base lights. 
Recharge the battery pack when the handset beeps and 
TALK/BATT flashes. 

R

4GEJCTIKPI

"

VJG

"

$CVVGT[

"

2CEM

• If the CHARGE/IN USE indicator does not light when 

you place the handset on the base, be sure the battery 
pack and AC adapter are correctly and securely con-
nected. Also, check the charging contacts on the hand-
set and the base. If the contacts are dirty or tarnished, 
clean them with a pencil eraser.

• When you first use the phone after charging or 

recharging the battery pack, the phone might not work 
and you might hear an error tone. Return the handset 
to the base for about 3 seconds to reset the security 
access-protection code.

• If the battery pack becomes weak during a call, the 

handset beeps every 3 seconds and TALK/BATT 
flashes. When this happens, recharge the battery pack.

• If TALK/BATT does not light and the phone does not 

work, recharge the battery pack. (The battery power 
might be too low to light TALK/BATT.)

• About once a month, fully discharge the battery by 

keeping the handset off the base until TALK/BATT 
flashes. Otherwise, the battery pack loses its ability to 
fully recharge.

• The handset loses its security access-protection code if 

the battery pack is completely discharged. Place the 
handset on the base to recharge the battery pack and 
reset the code.

• If you are not going to use your phone for an extended 

period, disconnect the battery pack. This increases the 
battery pack’s usable life.

The supplied battery pack should last for about a year. If the 
battery pack does not hold a charge for more than 2 hours 
after an overnight charge, replace it with a new 3.6-volt, 600 
mAh battery pack with a connector that fits the socket in the 
battery compartment. You can order a replacement battery 

R

"

9#40+0)

ý

R

"

Dispose of the old battery pack 
promptly and properly. Do not 
burn or bury it. See “Battery Safety 
Instructions” on Page 3 for 
additional information on proper 
battery handling.

Summary of Contents for 43-3536













Reviews: