manualshive.com logo in svg

Radio Shack 43-1247, Owner'S Manual, Page: 4 / 24

Share
Download
Radio Shack 43-1247 Owner'S Manual Download Page 4

4

INSTALLATION

You can set the AFX-500 on a flat surface or mount it on a wall
(see “Mounting on a Wall” on Page 5). Choose a location that
is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• at least 2 feet away from any electronic equipment

Notes:

• Your AFX-500 connects directly to a modular telephone

line jack. If your telephone wiring does not have a modular
jack, you can update the wiring yourself using jacks and
adapters available at your local RadioShack store, or have
the telephone company update the wiring for you.

• The USOC number of the jack to be installed is RJ11C.

• The socket-outlet shall be installed near the equipment

and shall be easily accessible. 

CONNECTING TO THE TELEPHONE LINE

To connect the AFX-500 to a single phone line, plug one end
of the supplied modular telephone line cord into the 

TEL LINE

jack on the back panel, and plug the other end into a modular
telephone line jack.

You can use the AFX-500 if you have more than one phone
line by connecting it to one of the lines. However, the AFX-500
will only process calls on that line.

Connecting to a Telephone System

A telephone system consists of two or more incoming lines, a
switching device, and any number of extensions. The AFX-
500 works with either KSU or PBX systems.

To work properly with a telephone system, the AFX-500 must
be connected between the system and the phone company’s
incoming lines. If there are multiple incoming lines, connect
the AFX-500 to the last line in the rollover order. Also, all
equipment on that line must connect directly to the AFX-500.

You should be familiar with telephone wiring to connect the
AFX-500 to a telephone system. If you have questions or are
not confident that you can correctly install the AFX-500, con-
tact a professional installer or your local phone company.

Caution:

 Do not connect the AFX-500 directly to a telephone

system phone jack. You might damage your phone system.

CONNECTING TELEPHONE DEVICES TO 
THE AFX-500

To connect a fax machine

, plug its modular cord into the 

FAX

jack on the back panel of the AFX-500. Set the fax machine’s
ring number to two or three rings.

To connect a modem

, plug the modular cord from its line input

jack into the 

FAX/MODEM

 jack on the AFX-500. Set the mo-

dem’s ring number to one ring.

 TEL
LINE

ANSWERING
   MACHINE

PHONE

   FAX

   FAX/
MODEM

LINKED PORTS

12VAC

 TEL
LINE

ANSWERING
   MACHINE

PHONE

   FAX

   FAX/
MODEM

LINKED PORTS

Telephone
  System

1

2

3

4

1
2
3
4

 TEL
LINE

ANSWERING
   MACHINE

PHONE

   FAX

   FAX/
MODEM

LINKED PORTS

 TEL
LINE

ANSWERING
   MACHINE

PHONE

   FAX

   FAX/
MODEM

LINKED PORTS

Summary of Contents for 43-1247

























Reviews:

No comments