background image

3

Carry Strap — lets you hang the remote
dial card from your neck for handsfree
carrying.

Your ET-007 is listed to UL standards
and meets all applicable FCC stan-
dards.

READ THIS BEFORE 
INSTALLATION

We have designed your phone to con-
form to federal regulations and you can
connect it to most phone lines. However,
each device that you connect to the tele-
phone line draws power from the line.
We refer to this power draw as the
phone's Ringer Equivalence Number
(REN). The REN is shown on the bottom
of your phone.

If you use more than one phone or other
device on the line, add up all the RENs.
If the total is more than five (three in ru-
ral areas), your phones might not ring. If
ringer operation is impaired, remove one
of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of

FCC Rules

. Upon request, you must

provide the phone's FCC registration
number and REN to your telephone
company. These numbers are shown on
the bottom of the phone.

Note: You must not connect your ET-
007 to:

• coin-operated systems

• party-line systems

• most electronic key phone systems

WARNING:

 To reduce the risk of fire or

shock hazard, do not expose this product to rain
or moisture.

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN.

CAUTION:

 TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.

This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product’s case.

This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accom-
panying this product.

!

!

43-007.fm  Page 3  Wednesday, March 22, 2000  11:24 AM

Summary of Contents for 43-007

























Reviews: