5
Connect the Speakers
1.
Place the subwoofer on a
fl
at surface. Place the two
satellite speakers as far as possible from each other.
2.
Connect the plug of the satellite speakers to the
subwoofer’s
To Speaker
jack.
3.
Turn o
Nj
your audio source, then connect the Control
Pod’s plug to your audio source.
4.
Plug the power cord into a wall outlet.
n
Note:
To connect the Control Pod’s plug to your source
device, you may need a 3.5mm stereo Y-type cable (not
included).
Use Your Speakers
1.
Turn on your audio source.
2.
On the Control Pod, slide
ON/OFF
to
ON
.
3.
Rotate the
Volume Control
(on the top of the Control Pod) to
adjust to a comfortable listening
level, and rotate the
Bass Vol
control (on the back of the
subwoofer) to desired bass tone.
ON/OFF