12
Operation
You must calibrate the detector when:
• It is being used for the first time.
• It is moved to a different location within the vehicle, or if it is
removed and placed in another vehicle.
•
DISTORT
appears.
Note: You must complete the circles in less than 2 minutes.
Otherwise, begin again from step1.
Follow these steps to calibrate your detector.
1. Hold down
CITY
for about 2 seconds until
CAL....
appears.
TURN
and
TWICE
flash alternately.
2. Turn the steering wheel all the way to the right or left and
drive in two complete circles. Then press
CITY
.
WAIT
flashes four times.
3. If the calibration is complete,
SUCCESS!
appears. If cali-
bration is not, the display scrolls
PLEASE
CALIBRATE
AGAIN...
PRESS
CITY-KEY
. Repeat steps 1 and 2.
After calibration, the compass heading appears.
ˆ
Operation
TURNING ON THE DETECTOR
To turn on the detector, rotate
VOLUME/OFF
toward
VOLUME
until it clicks. A tone sounds and
WELCOME
appears. After self-
22-1694.fm Page 12 Thursday, September 12, 2002 8:48 AM