7
Mixing Mono or Stereo
To mix mono signals with stereo signals, set
STEREO/
MONO
to
STEREO
.
When
STEREO/MONO
is set to
MONO
:
• The mixer routes monaural input signals of devices
connected (separately) to the mixer’s
AUX 1 L
,
AUX 1
R
,
AUX 2 L
,
AUX 2 R
jacks to both outputs.
• The mixer changes stereo input signals of devices
connected to the mixer’s
AUX 1 L/R
and
AUX 2 L/R
jacks to monaural signals.
For mono amplifiers (found in some PA systems), set
MODE STEREO/MONO
to
MONO
for best results.
Voiceovers
Talk into a microphone to mix pre-recorded music or
sound from an audio input source with your voice.
1.
Before talking, adjust
CHANNEL
(corresponding to
the connected audio source) to the desired volume.
2.
As the music plays, talk or sing into the microphone.
Adjust the microphone and audio levels so you can
hear yourself over the pre-recorded sound.
3.
If you pause and stop talking or singing, adjust
CHANNEL
to its original position (step 1).
4.
When finished, turn off the microphone and adjust
the audio source’s
CHANNEL
to its original position
(step 1).
