Radio Shack 32-2058, User Manual

Page: 18 / 24

18
Beyond the Basics
using echo
The mixer plays echo effects, and lets you adjust echo delay,
number of echo repeats, and the echo’s volume. The echo is
applied to the sound before all the inputs are mixed.
1. Set
ECHO
to
MIC
to apply the echo effect to the
microphones and
AUX LINE
input.
2. Set
ECHO
to
MUSIC
to apply the echo effect to the channel
outputs.
3. Set
ECHO
to
OFF
to turn off the echo effect.
adjusting echo delay, repeat, and volume
ECHO DELAY
lets you adjust the time interval between echoes.
Set
ECHO DELAY
to
0
for minimum delay, and to
10
for maximum
time delay.
ECHO REPEAT lets you control the length of time a tone is
repeated (reverberation). Set
ECHO REPEAT
to
10
for the longest
time repeat and to
0
for the shortest.
ECHO LEVEL
lets you adjust the echo output level. Rotate
ECHO LEVEL
toward
10
to increase the echo level, and toward
0
to decrease it.
playing the signal from the sound effect
device
To play signals from the device connected to the
EFFECT
jacks,
set
RECEIVE
to
ON
. Rotate
RECEIVE
to adjust the volume of the
device connected to the
EFFECT
jacks without changing the
sound effect device’s volume. Rotate
RECEIVE
toward
10
to
raise the volume and toward
0
to decrease it.
When you are not using the connected inputs, set
RECEIVE
to
OFF .