12
Beyond the Basics
sound check
1. Select an input source to play.
2. Adjust its volume (
CH
control) to its preset signal level (see
“presetting input signal levels” on Page 9). The mixer’s
LED meters should read
0dB
or less.
3. Adjust your receiver/amplifier’s volume to an appropriate
level for the location or event where the mixer will be
used.
4. Adjust the
LEFT CHANNEL
and
RIGHT CHANNEL
frequency controls
to your preference (see “using the seven band equalizer”
on page 15). If this causes the LED meters to exceed
0dB
,
adjust
MASTER
downward until their readings return to
0dB
.
Adjust your output device’s volume accordingly.
