background image

5

The Basics

* When the power-supply cord or plug is damaged.

* If liquid has been spilled or objects have fallen into the appliance.

* If the appliance has been exposed to rain or water.

* If the appliance does not operate normally by following the 

operating instructions. Adjust only those controls that are 
covered by the operating instructions, as an improper adjustment 
of other controls may result in damage and will often require 
extensive work by a qualified technician to restore the appliance 
to normal operation.

* If the appliance has been dropped or damaged in any way.

* When the appliance exhibits a distinct change in performance.

Servicing

 — Do not attempt to service this appliance yourself, as 

opening or removing covers may expose you to dangerous voltage 
or other hazards. Refer all servicing to qualified service personnel.

Replacement Parts

 — When replacement parts are required, be 

sure the service technician has used replacement parts specified by 
the manufacturer or have the same characteristics as the original 
part. Unauthorized substitutions may result in fire, electric shock or 
other hazards.

Safety Check

 — Upon completion of any service or repairs to this 

appliance, ask the service technician to perform safety checks to 
determine that the appliance is in proper operating condition.

Lightning

 — For added protection for this product during a 

lightning storm, or when it is left unattended and unused for long 
periods of time, unplug it from the wall outlet. This will prevent 
damage to the product due to lightning and power line surges.

Attachments

 — Do not use attachments not recommended by the 

product manufacturer as they may cause hazards.

Wall or Ceiling Mounting

 — The product should be mounted to a 

wall or ceiling only as recommended by the manufacturer.

Summary of Contents for 32-2056













Reviews: