background image

RADIO SHACK

A Division of Tandy Corporation

Fort Worth, Texas 76102

4A5

Printed in Taiwan

SPECIFICATIONS

Type ..........................................................Dynamic Microphone with Push-to-Talk Switch

Impedance ........................................................................................... 300 ohms at 1 kHz

Output Sensitivity ...................................... –64 dB 

±

3 dB at 1 kHz with Maximum Volume

(0 dB = 1 V/

µ

 bar, Distance 0.5M)

Characteristic .......................................................................................... Noise-Cancelling

Cable................................................................................Coiled Cord with 5-pin DIN Plug

Battery Type ............................................................................Two AAA Alkaline Batteries

(such as Cat. No. 23-555, not supplied)

Included Accessories ................................................... One Clip Hanger and Two Screws

Specifications are typical; individual units might vary. Specifications are subject to change
and improvement without notice.

RADIO SHACK LIMITED WARRANTY

This product is warranted against defects for 90 days from date of purchase from Radio
Shack company-owned stores and authorized Radio Shack franchisees and dealers.
Within this period, we will repair it without charge for parts and labor. Simply bring your
Radio Shack sales slip 
as proof of purchase date to any Radio Shack store. Warranty
does not cover transportation costs. Nor does it cover a product subjected to misuse or
accidental damage. 
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO EXPRESS WARRAN-
TIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURA-
TION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states
do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limi-
tation(s) or exclusion(s) may not apply to the purchaser. 

This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. 

We Service What We Sell 

9/94

21-1177.fm  Page 4  Thursday, August 5, 1999  8:44 AM

Summary of Contents for 21-1177

Page 1: ...Filter reduces wind and pop noise 2 Foot Cable with 5 Pin DIN Connec tor for easy connection to your CB or outdoor PA system Low Impedance Operation lets you use your microphone with a wide range of equipment INSTALLING THE BATTERIES You need two AAA batteries not sup plied to power your microphone We rec ommend alkaline batteries such as Cat No 23 555 1 Push the tab on the battery com partment co...

Page 2: ... behind the dashboard CONNECTING THE MICROPHONE Plug your microphone s 5 pin connector into your transmitting device s plug USING THE MICROPHONE Push the switch on the microphone s side to send a transmission Release the switch to receive USING THE AMP To use the microphone s internal pream plifier set AMP ON OFF to ON Adjust VOL to vary the output level of the ampli fier To turn off the amplifier...

Page 3: ...e if you cut a wire and find the product is defective Caution If you are unsure about how to rewire the plug do not risk damaging your equip ment and possibly violating FCC regulations Take your microphone this owner s manual and the transmitting device to your local Radio Shack store for service Only an accurate circuit analysis can ensure proper compatibility between the microphone and the devic...

Page 4: ...rom Radio Shack company owned stores and authorized Radio Shack franchisees and dealers Within this period we will repair it without charge for parts and labor Simply bring your Radio Shack sales slip as proof of purchase date to any Radio Shack store Warranty does not cover transportation costs Nor does it cover a product subjected to misuse or accidental damage EXCEPT AS PROVIDED HEREIN RADIO SH...

Reviews: