background image

14

15

Searching for Frequencies

During a tune search, the scanner tunes up or down 

starting from a frequency you specify. 

1.

   Press 

TUNE

. The display alternates between 

PSE

 

and 

t

.

2.

   If you want to change the starting frequency, enter a 

new frequency and press 

ENT

.

3.

   Press 

PSE

 to start tune search. 

t

 appears on the 

display.

Service Bank Search

Your scanner contains groups of preset frequencies 

called Service Banks. You can search for marine, fire/
police, aircraft, ham, FM, and weather transmissions even 
if you do not know the specific frequencies that are used 

in your area. 

Then you can store the frequencies you find into the 
scanner’s channels (except for weather and marine 
banks, which are already stored as channels). To start a 
search, press the button of the Service Bank you would 
like to search ( Marine, Fire/Police, Aircraft, Ham, FM, or 
Weather).

Storing Found Frequencies

Once you find interesting frequencies during a Tune or 
Service Bank search, you can store them in the scanner’s 

channel-storage banks.

1.

   Press 

ENT

 when you find a frequency. The bank 

number and 

StorE

 appear.

2.

   To change banks, enter the new bank number.

3.

   Press 

ENT

 to store the frequency. The channel and 

frequency flash twice. To cancel the operation, press 

TUNE/CLEAR

.

•  The frequency is automatically stored in the first empty 

channel of the selected bank.

•  If the scanner displays 

-dUPL-

, the frequency is already 

stored in another channel. Press 

ENT

 if you want to 

continue storing the frequency. Press 

TUNE/CLEAR

 

to cancel.

•  If there are no empty channels in the bank, 

Ch-FULL

 

appears. You can select another bank or clear some 
channels in the current bank (see 

“Clearing a Stored 

Channel”

 on page 19).

•  If the scanner displays 

-dUPL-

 or 

CH-FULL

, you can 

store another channel location by pressing 

PGM

. The 

channel number flashes and 

000.0000

 (or previous 

frequency) appears. Press the desired channel number 
then press 

ENT

. Repeat if needed. Press 

ENT

 again 

when an empty channel is found.

Birdie Frequencies

All scanners have birdie frequencies, which are signals 

created inside a scanner that can cause interference. 

To find the birdies in your scanner: 

1.

  Disconnect the antenna, and make sure that no 

other nearby radio or TV sets are turned on near the 

scanner. 

2.

  Search every frequency range from its lowest 

frequency to the highest. Occasionally, the 
searching will stop as if it has found a signal, often 

without any sound. This is a birdie. 

3.

  Make a list of all the birdies in your scanner for 

future reference.

Search Commands

•  Press 

PSE

 to pause searching. Press 

PSE

 again to 

resume.

•  Press 

•/Delay

 to turn the two-second delay 

feature on and off.

•  Press 

L/O

 to lock-out a frequency (except 

Weather band).

•   To reverse the search direction at any time, press 

 

or 

.

•   If necessary, you can select search groups using 

the number keys.

Summary of Contents for 2000650


















Reviews: