4
Skip
User can choose a desired channel from being scanned. Press
CH
or
to go to the desired channel.
Press and hold
FUNC
key for, then press
CH
key to skip this channel from scanning. Icon “ ” is on to
indicate this working channel is set to be skipped. Repeat the above steps will cancel the skip function of
the channel.
5. Hi/Low / Automatic Power Off Button
Press this button to toggle the high or low RF power.
Automatic Power off Button
Press and hold
FUNC/MON
button, then press
HI/LO
button to enable or disable the auto power off
function. The display will show “
AP
ON
” or “
AP
OF
” for one second, when the timer is activated/deactivated.
The timer automatically turns off the unit when it is idle for 2 hours.
6. QUIET /QUIET Scan Button / Reset
Press
QUIET
button to enable or disable the
QUIET
privacy mode operation.
a)
Hold
down
QUIET
button for 1.5 seconds until
QUIET
is displayed and the quiet code flashes.
b)
Repeatedly press (or hold down)
CH
or
CH
until you see the code number you want to use.
c)
Press
QUIET
button to store the code.
To turn on the quiet feature, press
QUIET
until
QUIET
appears. To turn off the feature, press
QUIET
until
QUIET
disappears.
Note:
We recommend you to select a quiet code from the range 7-30. If you select a code below or
above that range, you must wait 1 to 2 seconds after holding down
PUSH-TO-TALK
before you start
talking.
QUIET Scanning (Only available under QUIET mode)
Press and hold
FUNC
key, and then press the QUIET key to enter into the QUIET Scan mode, and icons
“SCAN” and “QUIET” will appear on LCD. When matching with an appropriate QUIET code, the scanning
stops and the icon ‘QUIET’ flashes. Scanning goes on after the signal disappears. Press any key, except
the ‘QUIET’ key, will quit scanning and stay on the channel just scanned.
Reset
To reset the unit, press and hold the QUIET key and turn on the unit. Reset operation will clean all the set
channels and restore the current channel to CH0 with QUIET off, and Dual Watch CH0. Power is toggled
to low mode, key tone and C-tone function are activated.
7. WX
Button
Press
WX
button to enable or disable the weather mode.
8. DUAL
Button
In main mode, press
DUAL
button to enter GMRS dual watch mode, press and hold
DUAL
button to set
the current channel as the dual watch channel; In weather mode, press
DUAL
button to enter weather dual
watch. During the dual watching, press any key will exit the scanning mode.
9. Push-To-Talk button / Keylock /C-Tone
Speak and communicate with the others by pressing the
Push-To-Talk
button. Speak into the
microphone in a normal tone of voice when the
TX
icon is displayed. When you finish speaking, release
the
Push-To-Talk
button.
Your can also lock your radio setting to avoid accidental pressing of keys by activating the keypad lock.
Press and hold the
FUNC
button, then press the
PTT
button to activate or deactivate the keypad lock.
Press and hold the
Push-To-Talk
while turning on the radio will enable or disable the courtesy tone (C-
Tone) function.
