2
INSTALLATION
The kit’s speakerphone unit comes
with the phone holder attached, so you
can easily mount the combination in
one location. However, you can re-
move the phone holder from the
speakerphone, so you can mount
them in separate locations.
Mounting with the Phone
Holder Attached
1. Choose a mounting location in
your vehicle for the speaker-
phone/phone holder combination
that is flat, easy to reach, and not
in the way of passenger/driver
movement or normal vehicle
operation.
2. Based on the depth of the mount-
ing surface, choose a set of four
screws (and washers/nuts if the
back of the surface is accessible)
for securing the speakerphone’s
mounting plate.
3. Using the mounting plate as a
template, mark the screw loca-
tions on the mounting surface.
Then at each location drill a hole
slightly smaller than the selected
screws. Attach the mounting plate
using the supplied screws.
Caution: Take care not to drill into
or damage objects behind the
mounting surface.
4. Slide the speakerphone’s mount-
ing bracket over the mounting
plate to secure the speakerphone.
5. Clip the microphone to a location
(such as the sun visor) where it
will be in front of you as you
speak, but where it does not block
your vision or movement. To
reduce background noise during
phone conversations, try to
choose a location that does not
vibrate (while the car is running,
for example).
Note: You can replace the clip
assembly on the back of the
microphone with the supplied flat-
back plate, then use a hook and
loop fastener (not supplied) to
attach the microphone to a cloth
surface. Simply remove the
screws and clip assembly from
the back of the microphone, then
attach the flat-back plate using
those screws.
Mounting with the Phone
Holder Removed
1. Slide the mounting bracket off the
back of the speakerphone.
2. Remove the screws from the back
of the speakerphone to separate
the phone holder and the speak-
erphone.
17-741.fm Page 2 Thursday, July 22, 1999 9:34 AM