6
OPERATION
STORING THE PAGER CODE
Before you use the pager, you
must set the codes which identi-
fy the pager and paging system.
1. Slide
/ /OFF
on the
pager to
OFF
.
2. Hold down
/ /OFF
and
slide it to (audible) or
(silent), then continue hold-
ing it down until
L
appears in
the display area on top of
the pager.
3. Make sure the transmitter is
on. Enter a 3-digit pager
code (
0 0 0
–
9 9 9
) then
0
.
4. Press
PAGE
on the transmitter. The pager’s code and
0
appear on the display, then the transmitter sends
the pager and system codes to the pager.
L
flashes and the pager beeps four times (and
vibrates twice if
/ /OFF
is set to ). Then
8
flashes
and the pager beeps once. The pager flashes the
code you sent (0) and beeps 12 times. You can press
the pager’s switch to stop it from flashing. Otherwise,
the code flashes 12 times.
Display Area
17-6024.fm Page 6 Friday, August 6, 1999 11:00 AM
