9
n
Notes:
• You must follow the connection labeling on the
amplifier:
To Antenna
and
To Power Injector
. The
amplifier will not receive power if it is reversed.
• You must follow the connection labeling on the
power injector:
To TV
and
To ANT
. Your TV or
receiver will be damaged if it is reversed.
• Consult your service provider before installing an
amplifier to a 75 ohm input.
• Make sure the power injector is between the amplifier
and the splitter (before the signal is split).
• Install waterproof seal around outdoor connections.
• The in-line signal amplifier is designed for use with
F-type connectors. For some antenna systems (such
as scanners), you must use connection adapters or
make special cables.
Troubleshooting
If your receiver does not improve signal strength after
you install the in-line signal amplifier:
• Check all connections.
• Unplug the power injector. If the signal worsens, the
amplifier was functioning.
• Try connecting to a different receiver. If possible, also
try connecting to a different antenna system.
• Minimize the number of splitters between the antenna
and your receiver, or try using amplified splitters.
• Minimize the cable length between input and receiver.
