![background image](http://html1.mh-extra.com/html/radio-shack/15-1975/15-1975_owners-manual_3425626011.webp)
11
Connecting the Receiver
Direct to a Remote TV
1. If the remote TV has A/V jacks,
connect a set of A/V cables
between the TV’s and receiver’s
A/V jacks. Be sure the yellow, red
and white plugs match the yellow,
red and white jacks on both the
TV and the receiver. If the TV has
only a single jack for audio input,
connect the white plug to it.
If the remote TV has no A/V
jacks, see the third “Important”
bullet under “Installation” on
page 5.
2. Plug one end of the supplied AC
adapter into the back of the
receiver and the other end into a
standard AC outlet. The power
indicator on the left face of the
receiver lights.
3. Plug one end of the supplied
modular phone cord into the
receiver’s
LINE OUT
jack and the
other end into a modular phone
line jack.
Note: You can use the transmit-
ter’s
PHONE IN
jack to connect a
telephone, modem or fax.
VIDEO
PHONE
IN
LINE
OUT
DC15V
300mA
Left – AUDIO – Right
OUT
AUDIO IN
CABLE/ANT. IN
VIDEO IN
RIGHT
LEFT
working.fm Page 11 Tuesday, July 13, 1999 12:39 PM