Radio Shack 130 MOVIECORDER Owner'S Manual Download

Page: 36 / 44

FUNCTION

PROBLEM

POSSIBLE REASON

SUGGESTION

PLAYBACK

Image in viewfinder is
fuzzy.

• Focus control on the

viewfinder must be
adjusted.

• Adjust the focus

control.

• Viewfinder must be

reset.

• Turn off the cam-

corder and discon-
nect the power
source. Then, after
about 1 minute,
reconnect the power
source. When the
characters dis-
played in the view-
finder are clear, set
the date and time.

No image appears on
TV.

• Camcorder improperly

connected to TV.

• Reconnect properly.

•

AV OUT/IN

set to

• Set

AV OUT/IN

OUT

• TV’s tuner or TV/video

switch not properly set.

• Set TV’s tuner to

channel 3 or chan-
nel 4 (if RF con-
verter connected).

• Set TV’s TV/video

switch to VIDEO (if
A/V input used).

Poor color.

TV not properly adjusted.

Adjust the TV.

Camcorder does not
play back in color on
your TV.

• Tracking not properly

adjusted.

• Adjust the tracking.

• Old or worn tape.

• Use a new tape.

Broken image.

• The battery pack might

be weak.

• Recharge the bat-

tery pack.

• Old or worn tape.

• Use a new tape.

Cassette cannot be in-
serted.

• Cassette is not right

side up or is back-
wards.

• Check cassette

positioning and rein-
sert.

• Another cassette al-

ready loaded in cam-
corder.

• Eject the cassette

and insert the new
cassette.

16-830.fm Page 36 Wednesday, July 21, 1999 9:32 AM

Summary of Contents for 130 MOVIECORDER













































Search results

Summary of Contents for 130 MOVIECORDER

Reviews:

Related manuals for 130 MOVIECORDER

Brands by name

Popular brands

Radio Shack 130 MOVIECORDER, Owner'S Manual

Search results

Summary of Contents for 130 MOVIECORDER

Reviews:

Related manuals for 130 MOVIECORDER

Brands by name

Popular brands