Settings
Setting Daytime and Nighttime Alert Volume
The daytime volume setting is effective from 6:00AM to 10:00PM, while the
nighttime volume setting is effective from 10:00PM to 6:00AM.
1.
Press
MENU
and then
or
to select
ALT VOL—DAY
or
ALT VOL—NIGH
.
2.
Press
or
to adjust volume levels from 1 to 16.
3.
Press
MENU
to exit.
n
Note:
Ensure that any volume you choose below the out-of-box specification
is a level that will provide adequate warning for the alerts.
Setting the Backlight
1.
Press
MENU
and then
or
to select
BACKLIGHT?
.
2.
Press
SELECT
and then
or
to select:
•
AUTO
– Backlight turns on for 10 seconds when a button is pressed, an
alert is received, or the AC adapter is plugged in.
•
ON
– Backlight is always on.
•
OFF
– Backlight does not turn on at all.
3.
Press
SELECT
again to confirm.
4.
Press
MENU
to exit.
Setting the Clock and Alarm
1.
To set the clock, press and hold the
CLOCK
button until the hour digits flash.
To set the alarm, press
CLOCK
.
É
flashes. Then
press and hold
CLOCK
until the hour digits flash.
2.
Use
,
,
,
to set the hour and minute.
3.
After setting, press
CLOCK
or
SELECT
to confirm and exit.
n
Note:
After setting the alarm, slide
ALARM SNOOZE/OFF/ON
to
SNOOZE
or
ON
to activate the alarm.
12-521 UG_En_112608.indd 8
12/02/2008 12:24:03
