10
If your autosound system has only two phono output jacks
(left and right)
and you are using four speakers, use two Y-adapter audio cables to make
the connections as follows:
Note: For the best results, use shielded phono plug-to-phono plug Y-
adapter audio cables, such as Cat. No. 42-2368 (not supplied).
• Connect one of the Y-adapter’s double phono plug ends to the amplifier’s
CH1
phono jack.
• Connect the other
double phono plug end to the amplifier’s
CH3
phono
jack.
• Connect the single phono plug end to the autosound system’s left output
jack.
• Connect one of the other Y-adapter’s double phono plug ends to the
amplifier’s
CH2
phono jack.
• Connect the other
double phono plug end to the amplifier’s
CH4
phono
jack.
• Connect the single phono plug end to the autosound system’s right out-
put jack.
12-1977.fm Page 10 Tuesday, July 13, 1999 10:07 AM
