3
The call data is stored in the call log
5.3.5 RECEIVING
A
GROUP
CALL
1
When a group Call is received, the Alarm Tone Sounds, the
radio automatically tune to the designated Channel, and Press
any key to disable the alarm.
2
Monitor the traffic channel for an announcement from the
calling ship.
3
The call data is stored in the CALL LOG
5.3.6
RECEIVING AN INDIVIDUAL CALL
1
When an Individual call is received, the Alarm Tone Sounds
The radio automatically tunes to the channel designated in the
DSC signal,
2
The MMSI contained within the signal are displayed on the
Text Area of the display. If the MMSI correlates to an MMSI
stored in the Buddy List, the corresponding name is displayed
in place of the MMSI.
3
The DSC signal data is stored in the Call Log.
5.3.7
RECEIVING AN “POSITION REPLY” CALL
1
When “Position Reply” received, the Alert tone sounds and the
“POS Received” message on 1
st
line and display the sender
GPS data.
2
The time & position could not be stored but able to output to
the NMEA port for external Chart-plotter.
3
Last Rx call information is stored in the position of menu “LAST
RX”
5.3.8
RECEIVING A GEOGRAPHIC AREA CALL
ALL SHIP
URGENCY
ID987654322
ALL SHIP
SAFETY
ID987654322
or
A GEOGRAPHIC AREA CALL is received by vessels within a
specific geographical boundary area.
1
When you receive notification of a geographical call, press any
key to cancel the alert. The radio automatically selects the
channel designated in the incoming call. The time and the user
MMSI are displayed on the screen and the call data is stored in
the call log
2
Monitor the working channel for an announcement from the
calling vessel.
6 SETUP
MENU
6.1
MENU FUNCTION DESCRIPTION
The radio’s setup functions are accessed through the Menu mode.
Menu mode selections are as follows.
GRP ROUTINE
FINISHER
FROM
Item
Description
ID987654322
BUDDY LIST
Selects the BUDDY List Entry routine to enter Names and
MMSI's for frequently called DSC stations. Up to 20 names
could be stored.
BACKLIGHT
set the backlight level, total 8 level be available.
CONTRAST
Selects display contrast setting: 1-8 levels.
GPS/TIME
Set the Position info if no GPS attached and define the display
POS and Time format, Offset and COG/SOG display settings.
RADIO SETUP
There are 4 items that user can customize – CH Name, Ring
Tone Volume, Beep Volume and Internal Speaker on/off.
DSC SETUP
There are 5 functions that allow user to alter – User MMSI
entry, Group MMSI entry, Individual Reply, DSC enable , and
POS reply
RESET
Recall ex-factory setting
6.2 Set-Up
Menu
Navigation
To access the Menu Mode:
Press and hold
MENU/DSC
key, Text area displays the Set-Up Menu
list.
To exit the Menu mode or sub –mode:
Page 29
Page 30
