Radio Flyer FLYER 840BL, Owner'S Manual

Page: 9 / 27

9
Note: Complete assembly of the bike per the steps below. The handlebar angle can be
adjusted as needed based on rider preference. Always re-tighten bolts to the specified
torque values prior to riding.
Step 2: Install the handlebar
A. Using the provided 6mm allen wrench, loosen the two bolts and remove the
stem faceplate. Ensure to rotate the fork so that the stem is facing forwards as
in the image below.
B. Align and center the handlebar in the stem. Check that the handlebar
orientation matches the image below and that the cables are not twisted.
C. Reinstall the stem faceplate and two bolts using the 5mm allen wrench. Evenly
tighten the bolts to 10 to 12 Nm using a torque wrench.
A
Continued on next page