Reposition the engine mount beams
on to the fire-wall and secure them with
four 4x25mm scre
ws.
...................4
....................4
4x25mm screw - washer
Blind-nut
Insert the blind-nut onto each
of the four holes make above.
! Align the mark on both engine mount
beams with the mark on the fuselage
A
B
B’
A
B
B’
1- GLOW ENGINE INSTALLATION
Attach the engine mount beams onto the fire-wall
so the distance between of two engine mount beams
is “A”,and B=B’ as show.
Secure the engine mount beams onto the fire-wall
with litter CA glue
Using a pencil or felt tipped pen, mark
the fire wall where the four holes are to
be drilled
.
A
B B’
Carefully remove the engine mount beams
and drill a 6mm hole through the fire-wall
at each of the four marks made above
.
6mm
1
