W
IRELESS
W
ATER
S
ENSOR
C
OPYRIGHT
©
2018,
R
ADIO
B
RIDGE
I
NC
.
W
IRELESS
W
ATER
S
ENSOR
P
AGE
2
OF
10
1.
Q
UICK START
To start using your sensor, simply go to:
https://console.radiobridge.com
From here you can register your device and immediately start receiving messages from the
sensor.
The sensor configuration, message monitoring, and setting up alerts is usually self-explanatory
through the user interface. For further explanations of any sensor features, you may refer to this
user guide.
2.
O
VERVIEW
2.1.
Sensor Overview
The wireless sensors designed and manufactured by Radio Bridge provide full sensor to cloud
solutions for Internet of Things (IoT) applications. The water sensor uses a water/liquid sensor
probe to detect the presence of water or other liquids. When the presence of water or
another liquid is detected, an alert is sent over the wireless network. Versions of the sensor
support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and SubGig.
Features include:
•
Built-in radio that talks directly with the wireless network. Standards include:
o
Sigfox
o
LoRa/LoRaWAN
o
SubGig®
•
Two types of tamper detection: enclosure tamper and wall mount tamper
o
Enclosure tamper detects if the packaging of the sensor itself is opened or broken
o
Wall mount tamper detects if the sensor has been removed from the wall or
mounting point
•
20,000-1M+ transmissions on a single battery and a 5-10 year battery life depending on
usage (see Battery section)
•
Fully integrated internal antenna
•
Over the air sensor configuration in the field
•
Automatic low battery reporting and supervisory messages
