R
ADIO
B
RIDGE
RBM101
I
U
SER
G
UIDE
C
OPYRIGHT
©
2017,
R
ADIO
B
RIDGE
I
NC
.
R
ADIO
B
RIDGE
RBM101
I
U
SER
G
UIDE
P
AGE
7
OF
19
•
“CMD”: Command Response
•
“ERR”: Error Message
•
“STA”: Status
Message
•
“
SEN
”:
Sensor Payload
3.2.1.
“C
MD
”: Command Response
Response from a previous AT command. For example, for AT commands that set valid
parameters the host would expect the response:
CMD OK
If the AT command is requesting the firmware version which happens to be v1.01 the
response would be:
CMD 0101
3.2.2.
“
ERR
”:
Error Message
This is an error message from the module that sends a 4-digit error code as ASCII coded hex
characters. For instance, error code 0x0000 would be represented by:
ERR 0000
See the
Error Messages
section for more detail.
3.2.3.
“
STA
”:
Status Message
This is general status message from the module that sends a 4-digit status code as ASCII coded
hex characters. For instance, status message 0x0000 would be represented by:
STA 0000
Note that status messages do not include errors. For errors see the message
type
Error Message
. See the
Status Messages
section for more detail.
