34
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: radijator@radijator.rs
ENTERING THE HIDDEN MENU.
Press and hold
right after press
and hold both buttons for five seconds. Right
upon entering the hidden menu, the display CL 00. That is the first parameter.
Errors on starting the boiler
All possible errors in the initial operation phase, that is during ignition can be split into three
big groups:
Group I
Errors during ignition relating to the situation without sparks, smoke, or any flame for
more than 20 minutes from the moment of starting the ignition heater.
Group II
Errors during ignition relating to the situation in which flame appeared but the boiler
shut itself down after a certain period (a few minutes).
Group III
The boiler successfully ignited and was working for a few hours. Reached the set
temperature and, for a longer time, there is no need to turn on neither the dosing system nor the fan
(this situation is mostly overnight). Right after, the temperature is dropping and the user wants a
higher temperature (mostly in the morning), and the boiler receives a signal to enter the ignition
phase, but there is no flame.
Group I
Possible
cause 1
.
PROBLEM 1 –
The flap of the fan for primary air is closed. The fan is located on the doser.
How to solve
PROBLEM 1
– Open the flap completely.
Possible
cause 2
.
PROBLEM 2
– The hose connecting air channels from the fan to the heater is not properly set.
How to solve
PROBLEM 2
– Affix the air hose both to the case of the heater and to the air channel
pipe
Possible
cause
3
PROBLEM 3
– Space deep in the furnace where pellets are combusted is full of uncombusted
remnants, that is cinders, therefore, there is no contact between pellets and hot air.
How to solve
PROBLEM 3
– Clean the depth of the furnace, primarily larger cinders
mechanically and smaller cinders can be vacuumed.
Possible
cause 4
PROBLEM 4
– Pellets used are highly moist.
How to solve
PROBLEM 4
– Try drier pellets.