Radiient Select-4, User Manual, Page: 4 / 4

3
REMOTE C ON TROL OP ERATION
REMOTE C ON TROL OP ERATION REMOTE C ON TROL OP ERATION
REMOTE C ON TROL OP ERATION
The infrared remote can be used to turn the Select-4 unit on or off as well as se-
lect between the input sources.
AU TOM ATIC SOU RC E SEL ECTION AU TOM ATIC SOU RC E SEL ECTION AU TOM ATIC SOU RC E SEL ECTION AU TOM ATIC SOU RC E SEL ECTION
The Radiient Select-4 HDMI switch can automatically detect when an input device
is powered-on or powered-off. Using this information, the Select-4 will automati-
cally select the first input device which is powered-on. To make best use of this
feature, keep at most one input device powered-on at any given time. This will al-
low the Select-4 to automatically select the appropriate input device.
4
TEC H N IC AL SPEC IF IC ATION S
TEC H N IC AL SPEC IF IC ATION S TEC H N IC AL SPEC IF IC ATION S
TEC H N IC AL SPEC IF IC ATION S
Inputs
Inputs Inputs
Inputs
►
4 HDMI inputs accept HDMI, HDMI/HDCP, DVI and DVI/HDCP at TV
resolutions including 480i, 480p, 720p, 1080i, 1080p and computer
resolutions from VGA to UXGA
►
RS-232 control port
Output
Output Output
Output
►
1 HDMI output: Passes the signal from the selected input
Controls Controls Controls Controls
►
“Consumer” infrared remote control or manual controls on front panel
► Optional “Professional” infrared remote control with direct access
codes and discrete codes for various functions
►
Automatic input source detection and non-volatile memory retention of
last input source selected
►
RS-232 automation/control interface
Power Power Power Power
►
Universal AC mains input:
• 100 - 240 VAC @ 50 - 60 Hz
• Consumption < 5W
Physical Physical Physical Physical
►
Dimensions 8.4” x 5.5” x 1.6” ( 21.6 cm x 14 cm x 4.1 cm )
Weight Weight Weight Weight
► Shipping - 3 lbs ( 1.4 kg )
Unit - 2 lb ( 0.9 kg )