Information
Page 3
Declaration of Conformity
We hereby declare that Roloid Gear Pumps have been designed in accordance with the following Directives
and Standards.
The Machinery Directive 2006/42/EC
EN ISO 12100-1,2 The Safety of Machinery
Conforms to all other harmonised standards, tests, and specifications, (In as much as they apply to
our products)
Declaration of Incorporation
According to Machinery Directive 2006/42/EC Annex IIB
This product must not be put into service until the machinery into which it is to be incorporated has been
declared in conformity with the provisions of the machinery directive 2006/42/EC.
The equipment shall only be loaded within the framework of our recommendations, and installed and
operated in accordance with our installation and maintenance instructions
.
The company hereby draws attention to the dangers of improper use of this equipment and particularly
warns users against operating with inadequate guarding of rotating parts and the use of naked lights in close
proximity to the equipment.
We will, upon a reasoned request from national authorities, provide any relevant information on its products.
Warranty Conditions
We arrant our products to be free of defects for a period of 12 months from the date the product is installed
to a maximum of 18 months from the date of shipment.
The warranty will only be valid if the product is loaded within the framework of our recommendations and
installed and operated in accordance with our installation and maintenance instructions.
The warranty is limited to the repair or replacement of defective product or part which is returned to our
factory after notification of failure.
We shall only be liable for the repair and replacement of the product and shall not be liable to any
consequential damages resulting from a defective or non-conforming product.
Scope
The following instructions will help you achieve a safe and satisfactory installation of your gear pump
ensuring the best possible conditions for long and trouble free operation.
Gear pumps are often supplied modified to suit specific customer requirements, these instructions shall be
supplementary to any information contained on certified arrangement drawing or separate instructions
supplied with the equipment.
