`
RW8300 (USB) Designer’s Guide Draft v.037 (04-20-17)
4
x
Selectable digital transmit and receive FIR filters
x
Support DHCP for LAN
x
One Ethernet port
x
Extended temperature: -40
濎
to +85
濎
x
Support IEEE 802.11b/g/n compatible WLAN
x
Support IEEE 802.11e QoS Enhancement (WMM)
x
Support IEEE 802.11h TPC, Spectrum Measurement
x
Support IEEE802.3 & IEEE802.3u
x
Support IEEE802.3x full duplex flow control
x
Support IEEE802.3az Energy efficiency
x
Support IEEE 802.11i (WPA, WPA2, WEP). Security ~ Open, shared key, and
pair-wise key authentication services
x
Support TLS mode
x
Firmware upgradable
x
FCC/IC/CE (pending)
x
RoHS compliant
Bluetooth Low Energy (BLE-single mode)
x
Bluetooth 4.0 single mode Compliant
x
Supports Host and Client modes
x
Integrated Bluetooth low energy stack including ATT, GATT, SMP, L2CAP, GAP
x
TX Power: 4.0 dBm Max ~ RX Sensitivity: -92.5dBm Min
x
Range: Up to 20 meters (line of sight)
x
12 digital PIOs, 3 analogue AIOs
x
10-bit ADC
x
Serial Interface (UART / SPI / I
2
C)
x
SPI for external flash
x
3 PWM modules
x
Wake-up interrupt
x
Watch Dog Timer
x
On-board microprocessor, RAM and ROM
x
On-board antenna
x
Passthrough Data Mode
x
AT Commands
x
Extended temperature operating
x
FCC/IC/CE
x
RoHS compliant
Bluetooth Low Energy (BLE-dual mode)
x
Fully qualified Bluetooth® v4.0 system
x
Full-speed Bluetooth operation with full Piconet and Scatternet support
x
Class 1 Bluetooth power level supported
x
Dual-mode Bluetooth low energy radio
x
2Mbps and 3Mbps EDR support
x
High-sensitivity Bluetooth receiver
x
Wideband speech
x
A-law,
μ
-law and linear voice data from Host
x
A-law,
μ
-law, and CVSD voice over the air
x
Voice interpolation for lost packets
x
Rate mismatch correction
